Iscar Adds Their Latest Creations To A Lengthy Line Of Flourishing Hole Generating Solutions



Iscar recently released a number of different drilling innovations to meet their customers needs. These recent products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their skill Iscar has come up with new and innovative ways to boost productivity for the customer. Here is a little bit about these new products, and how they will serve the end user of these products.

SUMOCHAM Drills

ISCAR's new SUMOCHAM drill family is an advanced evolution of the exceptionally thriving CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for a range of material groups. SUMOCHAM drills can be used on milling centers or lathes.

SUMOCHAM features four different standard drill head geometries, designed for optimum performance and high dependability. The drill head is manufactured with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are obtainable in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, uninterrupted chip flow and a ground gash for improved penetration.

The drill shank design is in accordance to DIN 9766 standard, with available drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies showcase coolant through holes. The accurate cylinder added to the clamping portion improves durability and decreases internal stresses. The rotation stopper planes are precision ground, to improve the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will provide longer tool life and increased productivity.

DR-DH Deep Drills

DR-DH drills can accomplish drilling depth-to-diameter ratio of 7XD and up. Engineered to be used on standard horizontal milling centers, turning, and multi-task machines. Use of additional machine and setup can be avoided. They will be offered as semi-standard item in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").

Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very stiff tool with a patented chip gullet design. It was designed for easily cut materials such as cast iron and low alloyed steel.

A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for enhanced chip flow. It was engineered for drilling gummy materials such as non-alloyed steel and high temperature alloys.

ISCAR DEEP HOLE DRILLS

With ISCAR's brand new solid carbide deep hole drills, you can easily drill up to 22 times diameter and reach bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This ability can speed up many high-volume operations. The deep-hole drilling station no longer needs to slow down a transfer line or stop it entirely because a drill breaks.

Different target applications include deep holes for automotive, hydraulic blocks and die & mold work. A aggregate of features aid the twist drills to cut faster, straighter,deeper, last longer and expel chips more readily. A special high-strength core creates a more durable drill point and allows for deeper flutes, enlarging the departure path for chips.

The drill tip itself have a 140 positive-point, four-margin design to preserve the edge, diminish thrust forces and help centering and tracking. A post-coat polishing step on the flutes, margins and cutting edges decreases friction and torque that can easily snap a drill.

The new drills are found in standard diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are offered on request. All are made of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be refurbished.

These are just some of the latest innovations coming from Iscar.

Brand New Cutters And Carbide Insert Shapes From Iscar To Better The Machining Procedure
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

Some Of Advancements In Carbide Inserts Coming From Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Numerous Progressions Have Enhanced Iscar's Line Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Push Pull Testing For Railway Industry With Calibrated Measuring Instruments. Mechanical Load Testing Methods For On Site Documentation To Testing Demands.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Iscar Announces A Revolutionary Family Of Slitting Cutters Using Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

The Most Recent In Carbide Endmill Architectures In A Extended And Successful Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Choosing An Auto Engineering Job Today.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.

Fresh New Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.